Ozone Plus EN5
(High Strength Hydraulic Patch)
Ozone Plus is the latest and one of the most innovative Bottom Patch fittings for frameless glass doors that comes with an in-built hydraulic system. The products under this range do not require any cavity to be made in the floor for installation. Hence, no digging, no cutting of the floor is required, making the installation quick & easy.
The Ozone Hydraulic Patch Fitting is surface mounted directly to the floor making it easy to install and thus a more cost-effective option for doors. Direct mounting to the floor is done with an adjustable base plate and this removes the need for pre-casting or cutting floor spring boxes, which is a slow messy process creating concrete dust and potentially weakening the floor slab. The Ozone’s innovation is in the hydraulic closer mechanism which fits within the patch fitting and allows closing adjustment like a floor spring. The closer mechanism can be non hold open or be 90-degree hold open.
The Ozone HS patch fitting is slightly larger than a normal ozone patch fitting and is 196 x 80mm, but does not look out of place when used in typical frameless glass entry. The patch fitting comes with 316 satin stainless steel covers.
The Ozone Hydraulic Patch Fitting is suitable for internal up to 1250mm wide maximum and external doors up to 1000mm wide maximum, made from 10 to 15mm TEMPAFLOAT® Toughened Safety Glass (TSG) up to 100kg maximum weight.
