PlateFix PF150 System
(Side Fix)
The PlateFix PF150 was born from the double-disc fixings by joining the discs into a single piece profile base plate with an outer clamping plate for a stronger multipurpose balustrade fixing. This enables the PF150 to be used with single or double fixings and it can be used vertically, horizontally, angled or a combination of the above.
- Architecturally Styled: less ‘busy’ alternative to a double-disc.
- Engineered: solid 316 Marine Grade Stainless Steel anchor fixing, providing the strength of double fixing with the simplicity of single plate design.
SAFELITE® EVA Toughened Laminated Safety Glass
Glass Thickness (Nominal mm) |
Inner Layer of Glass (Nominal mm) |
Interlayer Thickness (Nominal mm) and Type |
Outer Layer Glass Thickness (Nominal mm) |
15.2 | 8 | 1.2 EVA | 6 |
17.2 | 8 | 1.2 EVA | 8 |
Interlinking rail or stiffener brackets are required when specifying SAFELITE® EVA Toughened Laminated Safety Glass (minimum panel widths apply)
SAFELITE® STF (Sentry®) Toughened Laminated Safety Glass with rigid interlayer
Glass Thickness (Nominal mm) |
Inner Layer of Glass (Nominal mm) |
Interlayer Thickness (Nominal mm) and Type |
Outer Layer Glass Thickness (Nominal mm) |
13.52 | 6 | 1.52 Sentry® | 6 |
17.52 | 8 | 1.52 Sentry® | 8 |
An interlinking rail is not required when specifying SAFELITE® STF (Sentry®) interlayer. (minimum panel widths apply).
Key Features
- The PlateFix PF150 Balustrade system is side fixed for (face) mounted applications.
- The PlateFix PF150 is 150mm high and 50mm wide with radius ends.
- The inner spacer is 20mm thick and the outer plate 6mm thick.
Material Finish
- Made from 316 grade stainless steel.
- Available in satin or polished finish. A special bead blast finish is available.
- Powdercoated upon request. Note: Powder coating is available in a wide range of colours with commercially available surface integrity warranties from 10 to 30 years.
- All fixings must be Stainless Steel.
Occupancy Type
- Suitable for occupancy types A, B, E, and C3. (subject to glass & fixing type).
- Occupancy Types as per AS/NZ 1170.1.2002.
Windzone
- Exceeds the wind loading for all Wind Zones up to and including Very High Wind Zone as set out in NZS 3604:2011
- Max design Wind pressure subject to glass type and fixing method.
The system is glazed with Metro Performance Glass, as follows:
- TEMPAFLOAT® 12mm & 15mm nominal thickness, monolithic toughened safety glass, with an interlinking rail.
- SAFELITE® EVA 15.2mm & 17.2mm nominal thickness, toughened laminated safety glass, with either an interlinking rail or stiffener brackets.
- SAFELITE® STF (Sentry®) 13.52mm & 17.52mm nominal thickness, toughened laminated safety glass with sentry interlayer. No rail or bracket required subject to minimum width met
Interlinking Rail
- All monolithic toughened frameless glass balustrades must have an Interlinking Rail to conform to NZS 4223.3.2016, including the latest amendment of NZBC B1.
Compliance
- Complies with AS/NZS 1170:2002, NZS 4223.3.2016, NZ Building Code B1, F2, F4 and F9
Scope of Use
- The PlateFix PF150 system is ideal for external balconies and stairs - as well as for internal stairs and landings. It can be fixed directly to either timber, steel or concrete surfaces.
- When required an interlinking top rail finishes off the system, producing a low profile modern look.
Balustrade Stiffener Brackets – for aligning and stiffening panels
Support Inquiries
- Metro Technical email technical@metroglass.co.nz